How to remove wall plugs – three fool proof DIY hacks
Escape to the Chateau: Angel shows Dick redecorated ceiling
We use your sign-up to provide content in ways you’ve consented to and to improve our understanding of you. This may include adverts from us and 3rd parties based on our understanding. You can unsubscribe at any time. More info
Whether you’ve moved into a new place or are simply redecorating your established home, wall plugs can be a nuisance when they are no longer used. Removing these small plugs in the wall doesn’t have to set you back time or money with these three easy DIY hacks.
How to remove wall plugs
A wall plug (commonly called a rawl plug or wall anchor) is used to provide a secure fixing for objects like cabinets and mirrors which are hung on walls.
Without them, screws would not grip into masonry and fail to provide a permanent fixing.
Removing wall plugs in order to fulfil your interior visions is easily done with just a few household tools and takes no time at all.
Even if the rawl plug you’re dealing with is incorrectly fitted, there is a simple fix to remove that unwanted fixture on the wall.
The screw method
When dealing with a well-fitted wall plug, the rim of the plug should appear to be sunken into the hole in the wall.
These plugs which are often red in colour will expand to fit the hole in which they sit and create a secure fitting ready to hang artwork, photo frames or mirrors on.
Take a small screw and fix it onto the wall plug with a few turns to establish a grip.
Grab your snout nose or flat pliers and clip onto the screw, wiggling the screw lightly whilst pushing it up and down with the pliers to ease the wall plug and screw out of the hole.
This should slide out easily and leave a small hole in the wall which can later be filled or replastered.
Filling the hole
The best way to ensure a smooth finish on a larger hole left when you remove a wall anchor is to use mesh tape to create a sleek layer over the top of the hole.
Lay the mesh tape over the hole and cut to size using your dry-wall knife.
Use joint compound to spread over the mesh tape layer and smooth out.
Leave to dry, lightly sand the excess off with sandpaper and paint over to hide the plaster job.
Spain second home sales jump as Britons ‘regain appetite’ [INSIGHT]
‘They won’t grow!’ Gardening expert shares salt hack to oust weeds [EXPERT]
How to kill brambles – the two most effective methods [HOW TO]
How to remove a wall plug that’s been incorrectly installed
It is easy to tell whether a wall plug is fitted properly by its appearance.
Generally, a wall plug that is very visible and looks as though it has been pushed in rather than screwed in will be a tell-tale sign.
Luckily rawl plugs are easy to remove when they are incorrectly fitted as they stick outside of the wall.
All you need is a pair of snout-nose pliers to loosen the plug out of the wall by gripping the rim of the wall anchor and gently wiggling it out.
When you can grab enough of it, pinch the rawl fitting with two fingers, twisting it to help navigate the plug out, revealing a tunnel-like hole in its place.
Source: Read Full Article